 |  |
Thanks for the help Shawn. It did not put the "Start In" informatin in the
Re: Telnet Settings
From: David W.Stallings
Date: Monday, June 29, 1998
Time: 7:59:14 pm
shortcut and now it is executing the telnet. However, it is only opening
the telnet session and will not execute any commands and therefore leaves
the telnet session open. Any ideas. I have gone through the entire process
of the so called script and it should be working.
Thanks
============================================
David W Stallings Landmark Communications, Inc.
david@lancom.net 3633B Frederica Street
www.lancom.net Owensboro, KY 42301
502-926-2001 Fax : 502-691-9187
============================================
-----Original Message-----
From: Shawn Hogan <shawn@data-point.com>
To: Optigold ISP List <isp-list@data-point.com>
Date: Monday, June 29, 1998 10:20 AM
Subject: Re: [Optigold-ISP] Telnet Settings
>David W.Stallings wrote:
>
>>I'm attempting to setup the telnet settings for Optigold and have not had
>>any success. It does not matter what I enter into the fields of the
table.
>>I always get the same return.
>>
>>"<unknown>" could not be found and is required to complete this operation
>>
>>any ideas what the problem is?
>
>One of the old installers of the Optigold ISP Runtime didn't set the
>"Start In" (path) on the shortcut. You can do 1 of two thins. Open up
>the properties and set the Start In to "c:\optigold" (or whatever it is
>if you changed it), or you can reinstall the runtime.
>
>Also, make sure the telscrpt.exe file is in the optigold directory.
>
> - Shawn
>
>-------------------------------
>Shawn D. Hogan
>President, Data Point Solutions
>http://www.data-point.com
>(619) 452-3696
>ICQ: 8319647
>
Messages In This Thread:
Return to Digital Point Solutions' Home Page