Change the Master server ip

Re: Change the Master server ip

From:

Date:

Time:

I create the slave server with no problem, but i can not connect to
the slave server using the host name form a remote machine, but i can
on the same machine where the secondary server is.

In fact, when i lookup the secondary server i get an ip which is not
defined on that zone.

Server: dns2.mexhost.com
Address: 200.23.232.59

dns2.mexhost.com.mx internet address =3D 200.23.232.59
mexhost.com.mx nameserver =3D dns1.mexhost.com
mexhost.com.mx nameserver =3D dns2.mexhost.com
dns1.mexhost.com internet address =3D 200.56.255.2
dns2.mexhost.com internet address =3D 200.56.255.1

the 200.56.255.1 is an ip without dns. The correct ip for dns2 is 200.23.232
=2E59

maybe a problem with the cache or something?

Thanks for your help

>Make sure you enter the server's name, as it appears in the Manager
>window, with a dot on the end (if you use the server's hostname
>instead of IP address). If you're already connected to the server,
>and if the script then asks if you want to connect again, you've made
>an error.
>____________________________________________________________________
>Chris Buxton Men & Mice
>support@menandmice.com Making DNS Easy
>
>At 5:04 PM -0600 2/4/02, Web Comunicaciones wrote:
>>I just delete all the zones at the secondary server, and when i run
>>the script i get: Could not connect.
>>
>>any tip?
>>
>>>At 2:55 PM -0600 2/4/02, Web Comunicaciones wrote:
>>>>>Well...
>>>>>
>>>>>The one-zone-at-a-time method is to use the zone options dialog,
>>>>>for each zone. But if you have a lot of zones, that's a pain.
>>>>
>>>>I think so... i have more than 1,000
>>>>
>>>>>If you're using QuickDNS Manager for Mac OS 8/9/X, you can use
>>>>>AppleScript. Unfortunately, there's no way with AppleScript to
>>>>>change the zone options, so you're left with deleting and
>>>>>recreating all of the zones on the slave server. (Disconnect from
>>>>>the master server before deleting all zones! Make a backup!)
>>>>
>>>>
>>>>
>>>>Yes i'm in OS 9
>>>>
>>>>Ok, and i only connect to the slave server? And delete one by one?
>>>>or there's another way to delete all?
>>>
>>>AppleScript. Copy the script below and paste it into Script Editor,
>>>then run it. The script will ask you which server to work on, and
>>>then it will disconnect any other servers. It will then delete every
>>>zone from the server.
>>>____________________________________________________________________
>>>
>>>tell application "QuickDNS Manager"
>>> if (count of servers) =3D 0 then
>>> beep
>>> display dialog =AC
>>> "You must be connected to the server." with icon stop =AC
>>> buttons {"OK"} =AC
>>> default button "OK"
>>> return
>>> else
>>> set listOfServerNames to (the name of every server)
>>> end if
>>>end tell
>>>
>>>choose from list listOfServerNames with prompt =AC
>>> "Delete all zones from which server?"
>>>if ((the result is false) or (the result =3D {})) then
>>> return
>>>else
>>> set serverName to the first item of the result
>>>end if
>>>
>>>tell application "QuickDNS Manager"
>>> -- prep:
>>> activate
>>> repeat with theZone in (every zone)
>>> try
>>> close document of theZone
>>> end try
>>> end repeat
>>> set theServers to (the name of every server)
>>> repeat with theServer in theServers
>>> if (theServer as text) =82 serverName then
>>> disconnect from server (theServer as text)
>>> end if
>>> end repeat
>>>
>>> -- delete all zones:
>>> set theZones to (every zone)
>>> if (count of theZones) > 0 then
>>> repeat with theZone in theZones
>>> delete zone ((name of theZone) as text) from servers {server
>>>serverName}
>>> end repeat
>>> end if
>>>end tell
>>>____________________________________________________________________
>>>
>>>>and the next step?
>>>
>>>There's an AppleScript we included with QuickDNS Manager called Add
>>>Slave Server. Reconnect to your master server, then open this script
>>>and run it.
>>>____________________________________________________________________
>>>Chris Buxton Men & Mice
>>>support@menandmice.com Making DNS Easy
>>
>>
>>--
>>________________________________
>> Alejandro Lopez Rumayor. Webmaster
>> Web Comunicaciones, Mexico
>> e-mail: alopez@webcom.com.mx
>> http://www.webcom.com.mx
>> Tres Cruces No. 2-D, Col. Coyoacan
>> C.P. 04000, Mexico, DF, Mexico.
>> Tels: +52 56593519, 55543171, 56593870, 56591349.
>> Pager Emergencia: 50941803
>> ICQ Number: 25802005
>>________________________________

--
________________________________
Alejandro Lopez Rumayor. Webmaster
Web Comunicaciones, Mexico
e-mail: alopez@webcom.com.mx
http://www.webcom.com.mx
Tres Cruces No. 2-D, Col. Coyoacan
C.P. 04000, Mexico, DF, Mexico.
Tels: +52 56593519, 55543171, 56593870, 56591349.
Pager Emergencia: 50941803
ICQ Number: 25802005
________________________________

Sales:
888/4-DPOINT

Support:
858/452-3696