Search Again: Re: OSX Server wont use QuickDNS From: Thierry Almy Date: Monday, September 15, 2003 Time: 1:03:13 pm I installed the carbon QDNS Manager ans I'm able to connect to, as you said, the loopback address. But I cant't connect using my IP, even not on the same machine as QDNS is running. Of course I restarted several times. My IP configuration is: IP: 192.168.1.2 NM: 255.255.255.0 GW: 192.168.1.1 and I'm using 192.168.1.2 as DNS The GW is an ISDN Router whitch is present in the network. I can ping to 192.168.1.2 and 192.168.1.1. But pinging to 192.168.1.2 will tell "no route to host". I've un- and reinstalled the hole stuff with no result. I have done the same installation two or three times earlier and then it was working well (on 10.2.4 Server). I'm really puzzled ... Thierry >If you can connect to QuickDNS Remote using the loopback address >(127.0.0.1), you should be able to connect using the ethernet IP >address. Did you change the network settings in System Preferences? >If so, try rebooting. >____________________________________________________________________ >Chris Buxton Men & Mice >Customer Support Specialist Making DNS Easy > >At 5:35 PM +0200 9/15/03, Thierry Almy wrote: >>Hi >>I just installed Quick DNS 3.5.1 on a fresh Mac OS X Server 10.2.6 >>Test-Installation. >> >>Everything works fine, excerpt that, after installation and >>rebboting, I can't connect to the server with it's IP Address. If >>I use 127.0.0.1 I can log into the QDNSServer Manager, using >>192.168.1.2 will not work. The IP Setup is ok. >>Do I have to manually stop some DNS Services ? >> >>Thanks for any help ... >> >>Thierry

Messages In This Thread: OSX Server wont use QuickDNS by Thierry Almy on Sep 15, 2003 at 8:38:02 am Re: OSX Server wont use QuickDNS by Men & Mice Support on Sep 15, 2003 at 10:00:57 am Re: OSX Server wont use QuickDNS by Thierry Almy on Sep 15, 2003 at 1:03:13 pm Re: OSX Server wont use QuickDNS by Men & Mice Support on Sep 15, 2003 at 1:31:44 pm