|
|
 |  |
Re: OSX Server wont use QuickDNSFrom: Men & Mice Support Date: Monday, September 15, 2003
Time: 1:31:44 pmThe clue here is that pinging 192.168.1.2 gives the error, "no route
to host". Fix this and QuickDNS Manager should be able to connect.
Double-check your IP address and subnet mask. Make sure there are no typos.
____________________________________________________________________
Chris Buxton Men & Mice
Customer Support Specialist Making DNS Easy
At 10:01 PM +0200 9/15/03, Thierry Almy wrote:
>I installed the carbon QDNS Manager ans I'm able to connect to, as
>you said, the loopback address.
>But I cant't connect using my IP, even not on the same machine as
>QDNS is running.
>Of course I restarted several times.
>My IP configuration is:
>IP: 192.168.1.2
>NM: 255.255.255.0
>GW: 192.168.1.1
>and I'm using 192.168.1.2 as DNS
>
>The GW is an ISDN Router whitch is present in the network.
>I can ping to 192.168.1.2 and 192.168.1.1. But pinging to
>192.168.1.2 will tell "no route to host".
>
>I've un- and reinstalled the hole stuff with no result. I have done
>the same installation two or three times earlier and then it was
>working well (on 10.2.4 Server).
>
>I'm really puzzled ...
>Thierry
>
>>If you can connect to QuickDNS Remote using the loopback address
>>(127.0.0.1), you should be able to connect using the ethernet IP
>>address. Did you change the network settings in System Preferences?
>>If so, try rebooting.
>>____________________________________________________________________
>>Chris Buxton Men & Mice
>>Customer Support Specialist Making DNS Easy
>>
>>At 5:35 PM +0200 9/15/03, Thierry Almy wrote:
>>>Hi
>>>I just installed Quick DNS 3.5.1 on a fresh Mac OS X Server 10.2.6
>>>Test-Installation.
>>>
>>>Everything works fine, excerpt that, after installation and
>>>rebboting, I can't connect to the server with it's IP Address. If
>>>I use 127.0.0.1 I can log into the QDNSServer Manager, using
>>>192.168.1.2 will not work. The IP Setup is ok.
>>>Do I have to manually stop some DNS Services ?
>>>
>>>Thanks for any help ...
>>>
>>>Thierry
|

Return to Digital Point Solutions' Home Page |