Search Again: Re: Can you use 4.6 with 3.5 From: Paul Willis Date: Friday, March 19, 2004 Time: 6:40:16 pm Hi Your message doesn't tell us anything What did you do? What does "it did not find it" refer to? Please spend a bit of time explaining exactly what you are trying to do and what exactly you have done and exactly what the problem is. Paul On 20 Mar 2004, at 02:12, Ross F. Markbreiter wrote: > I did that and it did not find it? > > >> I must admit I am not 100% sure what you are trying to do but... >> >> If you have QuickDNS 3.5 on OS X and want to go to 4.6 on OS X then >> you just need to run the installer. The QuickDNS 4 installer looks >> for an existing copy of QuickDNS 3.5.x and acts appropriately. >> >> If you have QuickDNS on OS 9 and want to go to 4.6 on OS X then you >> need to follow these instructions >> <http://kbase.menandmice.com/view.html?rec=18> >> Connect to the QuickDNS 3.5 server using QuickDNS Manager 3.5 (also >> needs to be running on OS 9) and run the "Export Server >> Configuration" script. >> Then copy the resulting folder to the OS X machine. >> Use QuickDNS manager 4.6 running on OS X to connect to QuickDNS 4.6 >> server on OS X and run the "Restore Zones" script. >> >> Regards >> >> Paul >> >> On 20 Mar 2004, at 00:53, Jody McAlister wrote: >> >>> did you start by importing them in? I'm not sure, but you may be >>> running into file permission issues if you just copied the files. >>> Plus, importing them will guarantee their format is compatible. >>> >>> I didn't run into that issue, so I'm just hypothesizing here. Also, >>> did you enter the license(s)? >>> >>> Or, if you are accessing the slave server, you can edit the slave >>> files. You edit the master files, and then have it zone transfer to >>> the slave. If this is the case , then it's normal. >>> >>> Also, you are using version 4 on os x, not 3.5. You must have the >>> admin be the proper one. Admin 4.5 will not connect to QDNS 4.6, >>> you must use the same version of 4.6 Admin. >>> >>> Hope that helps, I'll be gone in just a few minutes. >>> >>> >>> >>> On Mar 19, 2004, at 4:41 PM, Ross F. Markbreiter wrote: >>> >>>> Ok, the thing is I connect ok to 3.5 QDNS running on OSX with >>>> QDNS MANAGER but cannot change data or add zones at all, I cannot >>>> do anything? any way to? >>>> >>>> >>>>> You have to use each versions respective admin program. You >>>>> cannot connect to both at the same time with one admin program, >>>>> but you can have both versions open on your computer and be >>>>> connected. >>>>> >>>>> Your situation is reversed, so your slave zones may update from >>>>> the os x server. Mine did not as my primary was on OS 9. My >>>>> steps were to alter the master server. then go into the slave >>>>> server, click on the domain name, and then go to file->reload. >>>>> >>>>> Now that I have both at 4.6, they work as one again. >>>>> >>>>> On Mar 19, 2004, at 4:19 PM, Ross F. Markbreiter wrote: >>>>> >>>>>> Thank you Jody, >>>>>> So HOW DO YOU CONNECT ? if we move the master to OSX and slave is >>>>>> OS9? YOU CANNOT CONNECT OT BOTH AT THE SAME TIME RIGHT? >>>>>> How do you add or change data? >>>>>> >>>>>> >>>>>> >>>>>>> Use the applescript to back up the master server and slave >>>>>>> servers. >>>>>>> Then install the new QDNS and then restore the zones from your >>>>>>> backups. At least this way everythings done automatically for >>>>>>> you. >>>>>>> >>>>>>> On Mar 19, 2004, at 3:03 PM, Ross F. Markbreiter wrote: >>>>>>> >>>>>>>> Ok, but we moved the 3.5 folder to OSX and keeps opening it in >>>>>>>> OS9 and we cannot change data, won't allow us? >>>>>>>> Any suggestions? >>>>>>>> >>>>>>>>> I did this for half a year already. Just finished last week >>>>>>>>> bringing both dns servers up to date. >>>>>>>>> >>>>>>>>> I had my master at 3.5 and the slave at 4.5. >>>>>>>>> >>>>>>>>> You will need to use different admin programs for each version >>>>>>>>> as they don't work for both. >>>>>>>>> In my case, I would make changes to the primary and then have >>>>>>>>> to go to the slave and click on the domain and then make it >>>>>>>>> reload. >>>>>>>>> Otherwise it wouldn't automatically update anymore. >>>>>>>>> >>>>>>>>> >>>>>>>>> On Mar 19, 2004, at 2:48 PM, Ross Markbreiter wrote: >>>>>>>>> >>>>>>>>>> Hi WE ARE USING 3.5 QDNS and are switching to OSX , before we >>>>>>>>>> switch to OSX FOR ALL MACHINES CAN WE >>>>>>>>>> Open data using 4.6 to open 3.5 data? >>>>>>>>>> Thanks >>>>>>>>>> Director Sales >>>>>>>>>> >>>>>>>>>> Ross F. Markbreiter >>>>>>>>>> >>>>>>>>>> Thewwwstores, Corp Dba >>>>>>>>>> The World Wide Web Store >>>>>>>>>> 31826D Village Center Dr. >>>>>>>>>> Westlake Village, Ca 91361 >>>>>>>>>> >>>>>>>>>> worldwidewebstore.com >>>>>>>>>> >>>>>>>>> Jody McAlister >>>>>>>>> President >>>>>>>>> In-Site Communications >>>>>>>>> 707-765-9993/800-998-1711 >>>>>>>> >>>>>>>> Director Sales >>>>>>>> >>>>>>>> Ross F. Markbreiter >>>>>>>> >>>>>>>> Thewwwstores, Corp Dba >>>>>>>> The World Wide Web Store >>>>>>>> 31826D Village Center Dr. >>>>>>>> Westlake Village, Ca 91361 >>>>>>>> >>>>>>>> worldwidewebstore.com >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> Jody McAlister >>>>>>> President >>>>>>> In-Site Communications >>>>>>> 707-765-9993/800-998-1711 >>>>>>> >>>>>> >>>>>> Director Sales >>>>>> >>>>>> Ross F. Markbreiter >>>>>> >>>>>> Thewwwstores, Corp Dba >>>>>> The World Wide Web Store >>>>>> 31826D Village Center Dr. >>>>>> Westlake Village, Ca 91361 >>>>>> >>>>>> worldwidewebstore.com >>>>>> >>>>>> >>>>>> >>>>>> >>>>> Jody McAlister >>>>> President >>>>> In-Site Communications >>>>> 707-765-9993/800-998-1711 >>>>> >>>>> >>>> >>>> Director Sales >>>> >>>> Ross F. Markbreiter >>>> >>>> Thewwwstores, Corp Dba >>>> The World Wide Web Store >>>> 31826D Village Center Dr. >>>> Westlake Village, Ca 91361 >>>> >>>> worldwidewebstore.com >>>> >>>> >>>> >>>> >>>> >>> Jody McAlister >>> President >>> In-Site Communications >>> 707-765-9993/800-998-1711 >>> >> >> >> > > Director Sales > > Ross F. Markbreiter > > Thewwwstores, Corp Dba > The World Wide Web Store > 31826D Village Center Dr. > Westlake Village, Ca 91361 > > worldwidewebstore.com > > > > >

Messages In This Thread: Can you use 4.6 with 3.5 by Ross Markbreiter on Mar 19, 2004 at 2:55:15 pm Re: Can you use 4.6 with 3.5 by Jody McAlister on Mar 19, 2004 at 3:06:22 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 19, 2004 at 3:11:26 pm Re: Can you use 4.6 with 3.5 by Jody McAlister on Mar 19, 2004 at 3:51:13 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 19, 2004 at 4:26:44 pm Re: Can you use 4.6 with 3.5 by Jody McAlister on Mar 19, 2004 at 4:35:09 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 19, 2004 at 4:48:46 pm Re: Can you use 4.6 with 3.5 by Jody McAlister on Mar 19, 2004 at 4:54:04 pm Re: Can you use 4.6 with 3.5 by Paul Willis on Mar 19, 2004 at 5:20:21 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 19, 2004 at 6:24:42 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 19, 2004 at 6:29:13 pm Re: Can you use 4.6 with 3.5 by Paul Willis on Mar 19, 2004 at 6:40:16 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 19, 2004 at 6:47:27 pm Re: Can you use 4.6 with 3.5 by Paul Willis on Mar 19, 2004 at 6:52:42 pm Re: Can you use 4.6 with 3.5 by Paul Willis on Mar 19, 2004 at 6:56:30 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 19, 2004 at 7:09:38 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 19, 2004 at 7:28:51 pm Re: Can you use 4.6 with 3.5 by Paul Willis on Mar 20, 2004 at 3:22:50 am Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 20, 2004 at 6:03:43 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 20, 2004 at 7:19:52 pm Re: Can you use 4.6 with 3.5 by Ross F. Markbreiter on Mar 20, 2004 at 7:49:22 pm Re: Can you use 4.6 with 3.5 by Men & Mice Support on Mar 26, 2004 at 1:26:58 am